EMC China Lab

How much does CE EMC certification testing cost?

Views :
Update time : 2024-08-27

Electromagnetic Compatibility (EMC) primarily studies the interference and anti-interference issues of electronic and electrical products. It addresses how to ensure that various electronic and electrical devices, equipment, or systems can operate normally without interfering with each other, achieving a state of compatibility.

 

How much does CE EMC certification testing cost?(图1)


EMC is divided into two major categories: EMI and EMS.

- EMI refers to the emission characteristics of a device, specifically the electromagnetic interference it emits externally.

- EMS refers to a device's immunity, its ability to resist external electromagnetic interference. The more sensitive a device is, the poorer its immunity.

 

EMC Electromagnetic Compatibility Testing Product Range and Standards

1. IT Information Products:

   - EMC Standards: EN 55022/EN 55024, now updated to EN 55032, EN 55035

   - Common Products: Personal computers, telephones, scanners, routers, accounting machines, printers, bookkeeping machines, calculators, cash registers, copiers, data circuit terminal equipment, data preprocessing equipment, data processing equipment, data terminal equipment, dictation devices, shredders, duplicators, power adapters, power supplies, digital cameras, etc.

 

2. AV Products:

   - EMC Standards: EN 55013/EN 55020, now updated to EN 55032, EN 55035

   - Common Products: Speakers, audio and video teaching equipment, video projectors, video cameras and monitors, amplifiers, DVDs, turntables, optical disc players, CRT TVs, LCD TVs, recorders, radios, etc.

 

3. Home Appliances:

   - EMC Standards: EN 55014-1/EN 55014-2

   - Common Products: Electric kettles, meat slicers, juicers, microwave ovens, solar water heaters, household fans, dish sterilizers, air conditioner compressors, freezers, range hoods, gas water heaters, etc.

 

4. Lighting Products:

   - EMC Standards: EN 55015/EN 61547

   - Common Products: Light tubes, bulb lamps, tunnel lights, industrial and mining lights, street lights, fluorescent lights, table lamps, floor lamps, ceiling lights, wall lights, electronic ballasts, lamp covers, ceiling spotlights, cabinet lights, light strips, etc.

 

5. Medical Devices:

   - EMC Standards: YY0505:2012, latest standards EN 55011:2016/A11:2020

   - Common Products: Radiotherapy devices, ECG testers, analyzers, ozone therapy devices, fumigation therapy devices, ultraviolet phototherapy devices, spectrum therapy devices, RF comprehensive therapy devices, ultrasonic nebulizers, etc.

 

6. Residential, Commercial, Light Industrial Products:

   - EMC Standards: EN 61000-6-3, EN 61000-6-1

   - Common Products: Light industrial machinery, electrical equipment for light industrial environments, electrical equipment for commercial buildings

 

7. Heavy Industrial Products:

   - EMC Standards: EN 61000-6-4, EN 61000-6-2

   - Common Products: Various heavy industrial machinery, control cabinets

 

8. Measuring Instruments and Laboratory Equipment:

   - EMC Standards: EN 61326-1

   - Common Products: Various testing instruments, laboratory electrical equipment, sensors, etc.

 

How much does CE emc certification testing cost?

- The cost of CE certification for some products is approximately $1,300 USD (based on a quote from China's JJR laboratory, which can save you about 30% on certification costs).

- Delivery Time: 10 working days

- Samples: 2 sets (including related accessories such as cables, etc.)

- Testing Standards:

  - Electromagnetic Compatibility: EN 55032, EN 55035, EN 61000

  - LVD: EN 62368-1:2020

 

Standard EMC Testing Items

1. emi testing Items:

   - Harmonic Current (2 to 40 harmonics)

   - Flicker

   - Conducted Disturbance (CE)

   - Radiated Disturbance (RE)

 

2. EMS Testing Items:

   - Electrostatic Discharge Immunity (ESD)

   - Radiated Electromagnetic Field Immunity (80MHz to 1000 MHz) (RS)

   - Electrical Fast Transient/Burst Immunity

   - Surge (Lightning) Immunity

   - Injected Current (150kHz to 230MHz) Immunity (CS)

   - Voltage Dips and Short Interruptions Immunity

 

EMC Testing Sample Requirements

The product must be in normal operating condition during EMC testing. When sending samples, the corresponding input/output loads and accessories should be included. Connection instructions and installation requirements should be confirmed with the laboratory in advance. If installation software is required, software usage instructions should be sent to the laboratory along with the samples. Generally, two sets of samples are sufficient.

 

EMC Testing Duration

The electromagnetic compatibility testing can be completed in approximately 2-3 weeks after receiving the test samples and payment. Expedited processing is available upon request. If the test fails and rectification is needed, the timeline will be extended.


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
ISO 10993-5 Tests for In Vitro Cytotoxicity ISO 10993-5 Tests for In Vitro Cytotoxicity
04 .03.2025
ISO 10993-5 in vitro cytotoxicity testing evaluates the toxicity of medical devices and biomaterials...
FDA Designated Cytotoxicity Testing Laboratory FDA Designated Cytotoxicity Testing Laboratory
04 .03.2025
FDA-designated cytotoxicity testing lab, JJR China, offers FDA-compliant biocompatibility testing wi...
Cytotoxicity Testing Labs Cytotoxicity Testing Labs
04 .03.2025
Cytotoxicity testing ensures medical device safety. JJR Lab provides compliant certification, meetin...
Introduction to UL94 Flammability Testing Introduction to UL94 Flammability Testing
04 .03.2025
UL94 is a key plastic flammability test for safety and compliance in electronics, automotive, and mo...
Canada Electrical Product Compliance Certification Canada Electrical Product Compliance Certification
04 .03.2025
JJR Lab tests electrical products for compliance with Canadian standards (CSA C22.2/UL), ensuring th...
Button Battery 16 CFR Part 1263 and ANSI/UL 4200A Button Battery 16 CFR Part 1263 and ANSI/UL 4200A
04 .03.2025
Button and coin batteries, and products containing them, must comply with 16 CFR Part 1263 and ANSI/...
American Certification Testing for Baby Walkers American Certification Testing for Baby Walkers
04 .02.2025
JJR Laboratory provides U.S. certification testing for baby walkers, covering design, safety, stabil...
Baby and Children's Products EU & US Certifica Baby and Children's Products EU & US Certifica
04 .02.2025
JJR Laboratory provides EU & US certification testing for baby and children‘s products, ensuring...

Leave Your Message