FCC Certification Test Labs

FCC Certification

The Federal Communications Commission (FCC) is an independent agency of the U.S. government that regulates the standards for electronic devices' radiation emissions. Almost all products that emit radio frequency energy must undergo testing by an FCC-listed or accredited lab and obtain FCC certification for EMC/telecom compliance.

JJR Lab is an FCC-approved testing lab with extensive experience in radio and wireless certification for the North American market. Partnering with labs that have deep industry expertise and broad technical knowledge can help you avoid common errors that may delay certification.

FCC Mark

fcc id, SDoC, and Covered Products

FCC ID 

Applies to mobile communication devices and other products with wireless communication features, such as 2G, 3G, 3.5G phones, DECT phones (1.8GHz, 1.9GHz), Bluetooth devices, tablets, wireless keyboards, wireless microphones, remote controls, walkie-talkies, and other low-power wireless devices.

FCC Safety Declaration 

Applicable to electronic products generally without wireless functions, such as monitors, lighting equipment, power supplies, household appliances, etc.

Notes: 

It is worth noting that the list above is not exhaustive, and FCC certification requirements may vary depending on the specific characteristics and functions of the device. If the device emits RF radiation or uses wireless technology, it is advisable for manufacturers or importers to consult the FCC or a qualified testing laboratory to determine whether FCC certification is required for their specific product.

More on FCC Certification

Typical Test Items 

Federal Communications Commission Numbers:

- Conducted spurious emissions

- Radiated spurious emissions testing

- Conducted emissions band edge compliance

- Maximum peak conducted output power

- 20dB bandwidth, 99% occupied bandwidth, carrier frequency separation

- Channel spacing

- Number of hopping channels

- Dwell time (occupancy time)

- Antenna testing requirements

- …

FCC Safety Declaration:

- Conducted emissions (CE)

- Radiated emissions (RE)

- …

Our Professional Testing Standards 

Below is a list of EMC testing standards we can perform. Our team is always available to answer any general inquiries or technical discussions regarding the EMC testing standards below. Not sure which standard applies to your product?

North American Standards (USA & Canada):

- General Standards: FCC Part 15B; ICES-003;

- ITE (Information Technology Equipment), AV Products: fcc part 15B;

- Wireless Devices: FCC Part 15C/15E; FCC Part 22/24/27;

- Lighting Products: FCC Part 15B; fcc part 18; ICES-005;

- Energy Storage Products: FCC Part 15B;

- Household Appliances: FCC Part 15B;

- Industrial, Scientific, and Medical Products: FCC Part 18; ICES-001.

CISPR/IEC Standards:

- General Standards: IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4;

- ITE, AV Products: CISPR 32; CISPR 35; IEC 61000-3-2; IEC 61000-3-3;

- Lighting Products: CISPR 15; IEC 61547; IEC 61000-3-2; IEC 61000-3-3;

- Household Appliances: CISPR 14.1; CISPR 14.2; IEC 61000-3-2; IEC 61000-3-3;

- Industrial, Scientific, and Medical Products: CISPR 11; IEC 61000-3-2; IEC 61000-3-3; IEC 61000-4 Series.

JJR Lab assists customers at every step of the EMC testing process.

Required Documents

The required documents vary by product. For detailed documentation specific to your product, please fill out our brief form, and our experts will gladly assist you further. Below are some typical documents required for FCC ID and fcc sdoc:

Federal Communications Commission Numbers:

1. The responsible party (manufacturer or importer) should have the product tested at an FCC-recognized test lab and obtain the test report.

2. Complete TCB Form 731 based on test results.

3. In addition to the above, the responsible party should provide the following documents and information:

- Technical documentation

- Circuit diagrams

- User manual

- FCC confidentiality agreement, authorization letter

- Product label

FCC Safety Declaration:

1. The responsible party (manufacturer or importer) should have the product tested by a test agency and obtain the test report.

2. After the product passes the test, affix the appropriate label and warnings to the product, and declare in the user manual that the product complies with FCC standards.

3. Provide a compliance declaration document from a U.S. local supplier.

JJR Lab assists customers throughout every step of the fcc testing process.

Sample Requirements for FCC ID Testing

- One RF frequency-fixed sample unit, one standard sample unit;

- Frequency-fixed samples are tested with multi-channel products;

- For single-channel samples, provide a continuous transmission sample.

Pricing and Delivery Time

You will never pay for unnecessary services! JJR Lab offers tailored quotes based on each client’s needs and budget. Additionally, based on our experience, you can expect FCC certification within 1 to 2 weeks.

However, the cost and delivery time for testing and certification vary depending on the product's complexity and testing requirements. JJR Lab provides free consultations to assess your needs and offer advice on how to start compliance.

A2LA Accreditation

When you choose JJR Lab for testing and certification, you can be confident that you are partnering with a trusted and reliable provider.

Our laboratory is A2LA accredited, which means we are authorized to perform FCC testing and prepare test reports accordingly. Our professional testing range includes IT products, AV products, lighting products, small appliances, power supplies, electric personal transport vehicles, batteries, and more.

Why Choose Us?

Founded in 1998, JJR Lab is an independent ISO/IEC 17025 accredited provider of product testing and certification services in China. We offer comprehensive testing and regulatory certification services for various products. Our goal is to certify your products and ensure compliance with regulatory standards to help you enter global markets.