EMC China Lab

FCC and CE Certification Testing for IT/AV Equipment

Views :
Update time : 2024-07-19

Information technology and audio-visual (IT/AV) products are continuously evolving and entering major global markets. In regions such as the United States and the European Union, these products must undergo testing and certification to ensure compliance with national and international health and safety standards. Some products may also require performance testing to verify image or audio quality. Only by meeting reliability and safety standards can products satisfy market regulators, buyers, and consumers.

FCC and CE Certification Testing for IT/AV Equipment(图1)

IT/AV Equipment Testing Standards

- Safety Standards for IT/AV Products: IEC/en 60065; IEC/en 60950-1; AS/NZS 60065; AS/NZS 60950.1; IEC/EN 62368-1; AS/NZS 62368.1; UL 60950-1; UL 60065; ul 62368-1; GB 4943.1; GB 8898

- EMC Standards for IT/AV Products: CISPR 32; CISPR 35; en 55032; EN 55035; fcc part 15B; ICES-003; GB/T 9254; GB/T 17618; AS/NZS CISPR 32; J55032

 

Product Range

Tablets, laptops, desktop computers, servers, keyboards, mice, monitors, telephones, routers, fax machines, shredders, hole punchers, printers, adapters, chargers, built-in power supplies, wireless chargers, portable power banks, servers, learning machines, computer game consoles, televisions, amplifiers, speakers, set-top boxes, radios, monitors, electronic keyboards, and more.

 

Supported by our CNAS, CMA, CBTL, ZLS, and EMSD qualifications, we can provide the following testing and certification services:

 

European Union CE certification

- EU Machinery Directive (MD 2006/42/EC)

- EU low voltage directive (LVD 2014/35/EU)

- EU Noise Directive (OUTDOOR-NOISE 2000/14/EC)

- EU Electromagnetic Compatibility Directive (EMC 2014/30/EU)

- EU Radio Equipment Directive (RED 2014/53/EU)

- Restriction of Hazardous Substances Directive (RoHS 2011/65/EU)

- Waste Electrical and Electronic Equipment Directive (WEEE 2012/19/EU)

 

IECEE-cb certification (International Recognition System for Multi-Country Certification)

- German GS Safety Certification

- Australian RCM Certification

- China CCC Certification

- Japanese PSE Certification

- Hong Kong EMSD Report

- Korean KC Certification

 

China JJR Laboratory provides testing services for IT/AV equipment, including FCC, CE, RCM, KCC, CCC, PSE, and IECEE-CB certifications. Located in China, our laboratory can help enterprises save 30% on certification testing.


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
Do Sensors Need to Pass FCC Part 15.231 Certificat Do Sensors Need to Pass FCC Part 15.231 Certificat
04 .28.2026
FCC 15.231 requires RF sensors meet emission, duty cycle, bandwidth, timing limits; tests: radiated,...
What is the CE-LVD Directive in CE Certification? What is the CE-LVD Directive in CE Certification?
04 .28.2026
CE-LVD (2014/35/EU) EU LV safety rule AC50–1000V/DC75–1500V; EN standards; tests: dielectric, insula...
Fan EN IEC 60335-2-80:2024+A1:2024 Compliance Fan EN IEC 60335-2-80:2024+A1:2024 Compliance
04 .28.2026
EN IEC 60335-2-80:2024+A1:2024 defines safety for household covering electrical, mechanical, thermal...
Thailand Telecom NBTC Certification Introduction Thailand Telecom NBTC Certification Introduction
04 .28.2026
Thailand NBTC certification is mandatory for wireless and telecom products, covering RF, EMC, safety...
Electronic Product Salt Spray Test Electronic Product Salt Spray Test
04 .25.2026
Electronic Product Salt Spray Test evaluates corrosion resistance in saline environments. Standards:...
AEC-Q100 IC / Integrated Circuit Compliance Testin AEC-Q100 IC / Integrated Circuit Compliance Testin
04 .25.2026
AEC-Q100 ensures automotive IC reliability under harsh conditions. Std: Rev-J; tests: environmental,...
AEC-Q102 Light-Emitting Device Testing AEC-Q102 Light-Emitting Device Testing
04 .25.2026
Automotive optoelectronic devices require extreme reliability; AEC-Q102 defines standards and test i...
Component Reliability Testing Component Reliability Testing
04 .25.2026
Component reliability testing ensures stability under extreme conditions, following MIL, JEDEC stand...

Leave Your Message